Home » Physiotherapy Equipment
Paraffin Wax Bath (PHY-01) | |  | Applications : - Small (14" X 8" X 6")
- Large (18" X 14" X 10").
- For lumber Traction. .
|
Salient Features :
Our physiotherapy equipment paraffin wax bath, tank is made of heavy stainless steel used and is mounted on ball bearing rubber castors, for easy mobility. Works in electricity 220 - 230 volts and fitted with two special tanks is impression type heaters. Thermostatically controlled comes complete with three core wire pin plug . | |
Shortwa medical diathermy 500 watt (Floor Model) (PHY-02) | | | Applications : - Deep Tissue Electric Field Therapy
- Therapy by Pad Electrode
- Disc Electrode and Magnetic Field Therapy By Monode
- Induction Coil
|
Salient Features : - The Filament Voltage can be adjusted in six steps
- It has 30min. treatment timer.
- The operating frequency 27.12 MHz.
- Maximum output power 500Watts.
- Switched off RF power at the end of the treatment.
|
| |
Vibrator Belt Messager (PHY-03) | | | Applications : - Beautifully sturdy stand with heavy duty electric motor for pulley arrangement.
- Canvas belt rotate over ball bearings and help to reduce unwanted flash at waist, hips, thighs, buttocks etc.
- Our Vibrator Belt Messager is the best physiotherapy equipment for loosing weight with two speed massager.
|
| |
| | | Applications : | A Solid-state lightweight, compact and portable unit with Microprocessor Control. The Ultrasonic waves differ from other electromagnetic radiation (Shortwave, Microwave etc.) with the energy being propagated as mechanical vibrations and gives a massaging effect to the deep tender part of muscles. Ultrasonic Muscle Stimulator is very effective in treatment of Neuromuscular and Muscular-skeletal diseases including Arthritis, Sinusitis etc. The sound head minimizes heat and thus eliminates any discomfort to the patient. |
Salient Features :
Our physiotherapy equipment ultrasonic unit is Microprocessor Controlled, Digital Display for Output continuous & Pulse Modes Four Selectable Settings in Pulse Mode Digital Timer Audio Alarm for Timer
Technical details :
Weight Height: 5.5"
Width: 10.5"
Depth: 7.5"
Voltage AC 220V Probe Transmitter Freq. 1 MHz.
Protection Class - I Complies with IEC 601-1
| |
Shortwave medical diathermy 500 watt (Table Model) (PHY-05) | | | Applications : - A treatment Timer Switch is provided to start the machine. This timer switch automatically disconnects the circuit at the completion of of predetermined dosage time.
- The intensity of heat can be adjusted by output control Rotary Switch in 5 steps. The machine is provided with a wide stunning range to work with all types of condenser pads. The output can be adjusted as per requirement of the patient under treatment.
- A special type of instrument colling fan is fitted inside the machine to keep the circuit and vaccum valve cool during the treatment.
- The machine operate on 220 Volts A.C. 50 cycles single phase mains current with a maximum output of 500 Watts. The operating Frequency is 27.12 MHZon
|
| Salient Features :
This units has been specially designed for Hospitals and physiotherapy Centres where the machine is required to run constantly for many hours to cope with the rush of patients. Due to heavy duty components and rigid construction this equipment is most suitable for continuous use.
Standard Accessories:
Main cord : 1 Pc.
Pad Electrode with cable, cloth cover felt : 1 Pair
Machine cover : 1 Pc
Spare fuse : 5 Pc
Mobile trolley : 1 Pc
Technical Details:
Power Output : 500 watts (approx.)
Operating frequency : 27.12 Mhz.
Wave length : 11 Meters
Main Supply : 220 Volts 50 cycles
Fuse : 5 Amp.
H.F. Power Source : Vaccum generating Valve. |
Shortwave Medical Diathermy 250 Watts (PHY-06) Standard Accessories: Main cord : 1 Pc.
Pad Electrode with cable jack pin : 1 Pair
Machine cover : 1 Pc
Spare fuse : 5 Pc
Felts : 2 Pc |
Salient Features :
This has been specially designed keeping in view the various needs of the profession of induction heating of the tissues using condenser pads. Being a portable units it can be used by the beside in Hospitals and Nursing Homes and can easily be taken to patient's home by Orthopedic surgeons and Physiotherapists. This simple to use and highly efficient unit utilizes high frequency mode in five stage to maximum 250 Watts. The resonance can be controlled by a tunning knob, the completion of dosage time. The unit is housed in a sturdy and attractive cabinet
Technical Details:
Power Output : 250 watts (High Frequency approx.)
Operating frequency : 27.12 Mhz.
Wave length : 11 Meters
Main Supply : 220-240 Volts 50 cycles
Fuse : 5 Amp.
H.F. Power Source : Vaccum generating Valve |
Traction machine electronic (Cervical & Lumbar) (PHY-07) | | | Salient Features : - The electrostatic intermittent traction machine is an accurate and sturdy unit. Improved reliability has been achieved using solid state Electronics. The Silent motor is smooth, reliable and lasting. The electronic traction is of solid construction and is easy to use the traction force can be easily adjusted from 5 to 45 kgs. The traction froce can be increased 90 kgs. using traction force doubler. The treatment time is electronically adjusted and displayed by LEDS digitally. At the end of treatment time the alarm comes up and traction stops.
- Traction Mode Selector : Operates in static (Constant Traction) or in intermittent traction mode.
- Hold Time/Rest Time : When the traction is in intermittent mode HOLD & REST time can be selected with rotary switch
- Traction Force Selector : The traction force of 5 to 45 kgs, is selected with a rotary switch, with double upto 90 kgs
- Treatment Time Selector : Displayed LEDS, switches off the unit after treatment time
- Mounting : Wall or table mounting
|
| Specifications:
Voltage : 220V, 50 Cycle
Force : Doubler upto 90 kgs.
Treatment : 1, 5, 10 sec.
Mounting : Table or wall mount.
Traction : 5 to 45 kgs with
Hold Time : 20, 40, 60 sec.
Time : Display
Standard Accessories :
Ultrasonic applicator : 1 Pc.
Applicator Stand : 1 Pc.
Space fuse : 5 Pcs.
Machine cover : 1 Pc.
Jelly bottle : 1 Pc. |
Traction Treatment Table (PHY-08) Salient Features :
A newly improved traction table suitable for Lumber or Cervical Traction. This table can also be used for other treatmentinstruments. The table is bery sturdy with a 24" wide top. The table is fitted with 'non friction' rolling lumber section top for smooth efficient traction. A mounting board is provided for convenient placement of traction machine. The table top elegant by thick upholstered id 72" (183cm) long. The overall length of the table is 92" approx. The mounting board is fitted with levelling device and provided with non skidpad. |
|
Copyright
© Rajas Enterprises (India), All Rights Reserved