Rehabilitation Aids

Salient Features :
All chrome plated tubular steel construction mounted on the wooden platform and fitted with wall bracket at the top wall mounting comes with adjustable swivel pulley block a set of joking weight and two handles with nylon ropes suitable for all shoulder elbow and chest exercises confirming ISI specification. Rehabilitation machines are used for physical rehabilitation therapy.

Salient Features :
Ruggedly built tabular steel frame stands on four rubber tipped property balanced legs provided with adjustable standard cycle seat specially designed adjustable handle fitted with one hard rubber tyre cycle wheel and standard chain and sprocket for cycle drive comes controlled variation in the riding effect odometer show speed and kilometer done oven baked paint finish. Rehabilitation machines are used for physical rehabilitation therapy.

Salient Features :
For effective administration of progressive resistance exercise to lower and upper extremities for the patients with impaired body balance, unique exerciser for the lower and upper extremities. Either Arms or Legs can carry out the pedaling movement. It can be fixed & adjusted in matter of seconds to limb size & to the degree of flexion or extension. The fully chrome plated unit with adjustable resistance is very light & easily portable and can be attached to any tubular chair, wheel chair or bed.

Frame work: Main unit should be made of 60mmx30mm rectangular chrome plated pipe and could be adjustable in seconds to limb size (legs or arms), frame should have attachment of 25mm dia pipe with two clamps to fix to a tubular chair for exercises.

Resistance; Pedaling movement in precision-machined cast iron clamp for resistance that can be varied through knob pedals should also have straps to hold the feet or hand.

Finish; Bright chrome plated finish with power coated clamps, provided with instruction manual. Rehabilitation machines are used for physical rehabilitation therapy.

Salient Features :
For grip strengthening exercises. Frame: Should be made of 10mm ×4mm thick chrome plated steel strip with calibration on upper bar (0 to 4c) and outer frame should be fitted on 75mm wide × 250mm long laminated wooden base. Chrome plated finished, metallic grip exerciser is fitted on a 50mm wide laminated base. Suitable for patients with very weak / infirm hand. Gives heavy resistance with six detachable springs. The upper bar is calibrated in centimeters and is provided with a needle to mark & record the daily progress.

Salient Features :
To permit active flexion and extension exercises for fingers & wrist. Unit should consist of the following: Exercise Board: Wooden exercise board (15"×12"×3") with a storage drawer. The laminated Top should have 26 holes at different positions to fix aluminum pegs (3 pegs) and springs. Finger Compression Springs: A set of three springs (10cm long) of different tensions and each spring is fitted with color-coded aluminum tops and bases. Grip Springs: A set of three pairs of springs (14.5cm long) with different tensions. Pairs should be marked in different colors and have the hooks to be attached to pegs. & Springs. One set of wooden roller and disc with hooks. Finish: All springs should be chrome plated, Aluminum pegs be anodized and wooden box in natural polished. Rehabilitation machines are used for physical rehabilitation therapy.

Salient Features :
Also called "Supinator-pronator" and used effectively to promote pronation and supination of the wrist. Grip Unit: Unit should have single grip hold, precision machined Cast Iron drum, fitted with brake shoes for resistance and smooth plastic handle to grip. The resistance level should be measurable. Drum should also be fitted with a d dial protractor to measure the range of motion. Wall Fixing: Unit should have wall-fixing arrangements with a 20mm chrome plated square tube of 50cm length to adjust the height of grip unit according to the need of patient. Finish: Grip unit should have oven baked black finish with working parts in bright chrome plated finish.

Salient Features :
A gait-training walker for children in age group of 2 to 6 years Technical Specifications: Frame: Tubular, welded frame fabricated from heavy gauge wall thickness tube with powder-coated finish. Frame is fitted with four 50mm dia rubber casters for easy mobility. Overall size of the frame should be length 21"× Width 20". Frame should also be fitted with a removable foam covered leg divider for scissors gait prevention. Body Support: Rectangular shaped chrome plated balance ring (inner size 25cm × 22cm) should be fitted with adjustable seat (cotton) to hold the child in an upright position. Height of the ring is adjustable from 20" × 28". Gripping Handle: A Chrome Plated Handle Bar (Adjustable from 23" to 31") is provided at the front for the patient to hold while walking Accessories One washable extra seat required with the walker. Rehabilitation machines are used for physical rehabilitation therapy.

Salient Features :
Walker folding type with 4 wheel mobile. The construction of the unit made of Aluminum pipe totally light weight and folding, the height of the walker is adjustable cy a lock, PVC foam hand grip provided for better grip to the user, heavy duty can toltate the weight of 100 kegs patient.