Home » Hospital
Furniture
A wide array of highly fashionable
and modernized range of hospital furnitures are offered by us that are
very useful in all the activities conducted in the hospital. These
furniture are equipped with all the modern facilities that make work
easy in the hospital premises. The finishing provided by us in the
furniture range is worth appreciating.
Emergency
Recovery Trolley (H.F-09)
|
|
 |
Emergency Recovery Trolley
available in Sizes: 210L x cms Height 65 to 95 cms. Emergency
Recovery Trolley made of Heavy duty ERW Steel tube, S.S.
swingaway railing, S.S. telescopic saline rod, storage tray and
oxygen cylinder cage
- Emergency Recovery Trolley are removable
X-Raytranslucent top and provided with a tray for
holding X-Ray cassettes underneath the entire length of
the stretcher.
- Height adjustment by hydraulic system, trendelentburg
and reverse trendelentburg by pressure cylinder.
- Fitted with 15 cm dia castors-two with brakes and
rubber buffers on all sides.
|
|
|
Examination
Couch (H.F-10)
|
|
|
Detail :
Medical Examination Couch's Overll Size: 187 x 51W x 81 cms
Medical Examination Couch's Backrest: 45L x 51W cms
Medical Examination Couch's Main Frame: 138L x 51W cms
Medical Examination Couch are made from C.R.C.A. sheet and
machine pressed.
- Easy and instantaneous tilt of backrest section with
the help of Gas spring system.
- Foam padded, upholstered top for patient comfort.
- Cabinet in lower section for storage of medicines,
bandages etc. using sliding doors for maximum utility
within limited space.
- Three drawers in upper section and swinging tray for
B.P.apparatus.
- Epoxy Powder Coated finish.
|
|
|
Dressing
Trolley (H.F-11)
|
|
|
Dressing Trolley made of
tubular pipe construction total over all size of 30"X20"X32"
the trolley with S.S. top finished with powder coated paint
units moved on castors Two with breaks and two without breaks
provided with two S.S. shelves, hinges of stainless steel Rod On
the all the three sides for the support on both the shelves
upper and lower. |
|
Dressing
Trolley(With S.S. Bowl & Bucket) (H.F-12)
|
|
|
Dressing Trolley made of
tubular pipe construction total over all size of 30”X20”X32”
the trolley with S.S. top and frame also made of stainless steel
pipe round type units moved on castors Two with breaks and two
without breaks provided with two S.S. shelves, hinges of
stainless steel Rod On the all the three sides for the support
on both the shelves upper and lower. Utensils provided made of
stainless steel and steel rod ring to hold the same properly
welded with the trolley. |
|
|
|
|
CRASH CART made of Best
quality heavy gauge tubular pipe and metal sheet construction,
the unit moves on the four castors in which two are with break
and two are without breaks, Top and lower shelves of the unit
made of stainless steel, Six number of total drawers provided on
the unit three on the each sides made of plastic and the plastic
tray of different colours on the frame to keep the emergency
medicines the top of the unit covered from all the three
sideswith the help of the stainless steel rod, the handle
provided on the unit to move around. The lower shelves also
covered from all the three sides with the help for the stainless
steel rods for the safety of the material. |
|
Bed
Side Locker-Deluxe (H.F-15)
|
|
|
Bed side locker construction
made of steel pipe and steel sheet of heavy gauge, the unit
covered from all the three sides and top made of stainless
steel, one small drawer under the top to keep small things for
the user and one big drawer on the lower side of the unit fully
covered and closed with the door, arrangement of lock and key to
close the drawer, unit moves on the four castors two with break
and two without breaks. Finished with powder coated paint of
thick microns in white colour |
|
|
|
|
The laminated board top in
two section measures 820x360 mm. The tubular frame work and
adjustable height by means of a gas spring is easy to use and
provides comfort to the patients and staff for close
observation. |
|
|
