Physiotherapy Equipment

Salient Features :
This diagnostic muscle stimulator is useful for treatment of muscle weakness, functional paralysis resulting from Traumatic Neurosis, Hysterical of Neuropraxia, Flaceed Paralysis, Spastic Paralysis, Cardio Vascular disorders, Muscle trains etc. This diagnostic muscle stimulator with Glavanic, Interrupted Galvanic, Faradic and Surge faradic currents comes in a compact metal housing duly fitted in a briefcase along with standard accessories. This device can also be used to plot S.D. curve due to its multi step frequency and duration of pulse width.

Accessories:
Standard accessories consist of plastic coated handle with cable, ball electrode, one patient leads with plate electrodes

Technical Specification:
Input Voltage : 220V AC 50Hz
Maximum output 120 Volts, smooth intensity control
i) Pulse Width: 10 micro/sec. to 300 milli sec. Pulse duration step control .01 to 300 milli sec.,
ii) Frequency: 6 Pulse per min. to 30 pulse per min. 1 pulse/milli sec. to 100 pulse milli sec.

Faradic : Comprises 40 pulses per second, each pulse of 0.9 ms

Surge Faradic : Two isolated controls are provided for changing contraction & rest period

Intensity : Common intensity control for all four mode of therapy

Mode Selector : Logic selector for selection of each therapy mode. An analog meter is provided for display of intensity for all four modes

Salient Features :
This device is an innovative break through over other traction in the market for the treatment of cervical and lumbar region of the spine with salient features:

Accessories:
Cervical Collar, Cervical spreader bar, Pelvic belt, Thoracic belt, Traction doubler, Main cord

Technical Specification:
Power Consumption : 100 Watt(approx.)
Input Voltage: 220 Volts A.C. 50 Hz.
Hold Time : 20, 40, 60, 80(second)
Release Time : 1,5,10,20(second)

Salient Features :
The interferential therapy offers advance technique to reduce pain and to exercise muscles with low frequency current. In I.F.T. two medium frequency currents are used crossing to each other at a point to produce a low frequency current Area of

Application:
Deep sited pain, sports injuries, pain of rheumatoid arthritis, pain of osteo arthritis, pain of osteo arthritis, miscular weakness etc

Salient Features:
The therapy modes:(a) 4 pole interferential, (b) 4 pole vector, (c) 2 pole modulated
Digital timer with alarm which cuts off when display read zero.
Dual intensity display i.e. CH-1 digital display and CH-2 LED display.
Sweep program.
Balance control of intensity.

Technical Specification:
Medium frequency : 2 Khz & 4 Khz
Base frequency : 0 - 150 Hz
Sweep frequency : 0 - 100 Hz

This compact Solid-state Microprocessor Controlled unit, with digital timer and intensity display is useful for functional paralysis resulting from traumatic neurosis, Hysterical of Neuropraxia, Flaccid Paralysis, Spastic Paralysis, Cardio-vascular disorders and Muscle Strain etc.This Therapeutic Muscle Stimulator has Galvanic, Interrupted Galvanic, Faradic and Surge Faradic currents. This unit is housed with ABS moulded cabinet. Salient Features Microprocessor controlled Pulse durations: 03, 1, 10, 30, 100, 300 ms Pulse Repetitive Freq.: 0.3, 1, 3 seconds Intensity variations: 0~130 Volts Technical details Weight: 1.6 Kg. Height : 139.7 mm Width : 266.7 mm Depth : 190.5 mm Voltage : AC 100~260 Protection Class - I Complies with IEC 601-1 Option for Built-in rechargeable battery

Description :
CPM is a method to treat joints of the lower limb for post operation recovery and gives excellent results. The device is programmed for septic arthritis, ligaments tendon healing and also for treatment of intra articular fractures.

Salient Features :
Electronic controls enables for range of motion.
Adjustable flexion angle from 0o to 110o.
0 to 30 minutes countdown timer.
Patient safety switch to stop and reverse the motion.
Manual up/down:Manual flexion and release

Technical Specification:
Mains Input : 20V AC 50Hz
Power : 20 watt
Time : 0 to 30 minutes
Flexion Angle : Adjustable from 0o to 110o
Delay timer : 0 to 10 second
Weight : 9 Kg

Application :
Hydrocollator is the modality of thermotherapy. It is thermostatically controlled machine to warm the water at a specific temperature of 100oF to 110oF. The inner chamber of unit is made of stainless steel and outer is heavy duty mild steel duly oven back painted and mounted on a M.S. frame fitted with heavy duty casters.

Salient Features :

Detail :
Rectangular mobile wax bath is being used for storing and melting of wax at desired temperature level. The glass wool insulated double wall device is available in two different size i.e. 14" x 10" x 7" and 20" x 14" x 10". The inner chamber is made of stainless steel and outer is oven painted mild steel with aluminum lid. The unit is designed with concealed heaters to reduce the recurring cost of wax. Fitted with nylon caster wheels.

Salient Features :
Input Voltage : 220V AC 50Hz
Load : 1 KW
Heat Source : Filament
Temperature control : Thermostatic control up to desired level.