Dental Equipment

Design Feature:
Manually operated chair having all the functions up-down controlled by foot pedal and back flat and up with lever fitted with the back all oright parts are chrome plated and chair has best quality paint finish.

Design Feature:
Dental chair manually operated hydraulic chair with 'Z' base, chair has all positions such as up-down, back complete flat and up. Headrest rotates to 180 Degree and could used as pediatric head rest. Chair can be fitted manually operated unit or fully automatic unit as desired. Surgical stool, height adjusted by pneumatic piston with adjustable back rest. Provision of Inbuilt suction unit one three way syringe and provision for air motor and air rotor hand piece, Halogen light having two intensity of 9 V and 12 Volt, spittoon and tumbler operated by solenoid value a x-ray view box provided with the unit to view the x ray on site, water attachment with water tank provided, heavy base sheet finish with off white powder coated paint and the color of the seat as per choice of the customer a thick lamination sheet provided on the seat to avoid the damage due to any liquid substance during procedure foot control hydraulic system given smooth movement to the chair for up and down.

1/2 HP Dental compressor seal unit fitted with safety valve for air release excess sorted, auto cut off system, pressure gauge and drain valve air rotor air compressor mounted on high pressure tank entirely powder coated paint, Power ½ HP Amperes 4.5 Flow 40 to 50 Liter per minute Speed 1000 rpm Noise 50 to 60 dB (A) Power supply 220V, 50 Hz Tank 25L Pressure 350 MMHG Weight 35 to 37kgs

Design Feature:
Surgical stool, height adjusted by pneumatic piston with adjustable back rest

Design Feature:
Electrically operated Dental chair with the main unit one set and patient chair and Dentist stool, main unit with 4 holes instruments hose , 3 Pieces and three way syringe, intra x ray film viewer electronic control box panel, chair cuspidor, saliva ejector clean water bottle system operating light unit foot control, with patient chair complete electric control dental chair 24V safety low voltage motor driven left armrest, seamless upholstery headrest for adult and children's. Specification: Race of High speed hand piece (No load) > 35x10/4 Min air pressure of 0.22 Mpa Race of low speed hand piece (no Load) 18x10/4 min at air pressure of 0.33 Mpa illuminance of dental light 10,000 to 15,000 Lux, Illuminance of x ray view Box 2,000 Lux Load of Motor Driven dental chair 1323 N, Maximum Height of cushion 800 MM Minimum height of cushion 550 MM, tilting angle of chair back 105 Degree to 170 Degree Moving range of head rack 120 MM, Max Tilting angle of chair cushion 10 Degree Dimension (LXWXH) 1900x1200x2000 MM Power AC 220V 50 HZ Overall power consumption 800 W, air supply pressure 0.55-0.8 Mpa water supply pressure 0.2-0.4 Mpa air exhaustion 55L/Per minute.

The dental X-ray package is a true insurance of quality with all the benefits of the RAJAS technology. The technic al features of our tube heads make them the safest on the market. An extremely high dielectric coefficient is obtained trough the use of specially treated oil. The high voltage transformer comes with the best insulators. A special expansion chamber compensates for the dilation of the oil caused by heat from the tube. The protection against leakage radiation is stricter than the strictest international standards. The hooded tube with grid, compensates for voltage fluctuation. Input voltage: 230V AC single phase Timer: Electric with digital display of mAs Output: 8 mA - 70 KVP Stand: Floor model/Wall model-ray tube: 1.5mm focal Spot Cone: Parallel

Brushless micro motor DC, light power output High performance and speed 1,000 - 35,000 R.P.M Power output maximum 130 watts(not less than that) Smooth rotation at high torque in low speed range Speed control through control Box/foot control both In foot control operation, speed should be set. In any desired speed level as maximum speed. Maximum power consumption 75W for control box Power supply to control box 100 VAC, 50-60 Hz Simple function selections. Forward and reverse gear change over switch. High torque level for mass penetration and finish High-grade electronic control unit with DC motor.

1/2 HP Dental compressor seal unit fitted with safety valve for air release excess sorted, auto cut off system, pressure gauge and drain valve air rotor air compressor mounted on high pressure tank entirely powder coated paint Power: 3/4HP Capacity: 80L/min Speed: 1400rpm Noise: 58dB(A)/40" Tank: 38L Pressure: 116psi Weight: 28kgs Dimension: 42x42x62cm Packing size: 47x47x70cm Guarantee: 24 month